ABS brand profile
VELLEMAN
Recommended nozzle temp 250°C. Single-source profile (cura); verify before relying on it.
Community: FairABS
Brand-Specific Recommended Settings
Recommended Nozzle
250°C
Generic ABS: 235-245°C
Recommended Bed
95°C
Generic ABS: 95-110°C
Max Print Speed
60 mm/s
Inherited from ABS profile
How Velleman Differs from Generic ABS
Nozzle: 250°C- 5°C above the generic ceiling (generic ABS: 235-245°C).
Bed: 95°C- at the generic minimum (generic ABS: 95-110°C).
Community Verdict
Fair
Recommended nozzle temp 250°C. Single-source profile (cura); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all ABS brands, see the ABS profile.
DIALED-IN VELLEMAN SETTINGS
Generate a complete slicer profile tuned for Velleman on your specific printer and slicer in seconds.
Generate Settings for Velleman