ABS brand profile
MATTERHACKERS
Recommended 245°C nozzle / 100°C bed. Single-source profile (openfilament); verify before relying on it.
Community: GoodABS
Brand-Specific Recommended Settings
Recommended Nozzle
245°C
Generic ABS: 235-245°C
Recommended Bed
100°C
Generic ABS: 95-110°C
Max Print Speed
60 mm/s
Inherited from ABS profile
How Matterhackers Differs from Generic ABS
Nozzle: 245°C- at the generic maximum (generic ABS: 235-245°C).
Bed: 100°C- sits inside the generic ABS range (95-110°C).
Community Verdict
Good
Recommended 245°C nozzle / 100°C bed. Single-source profile (openfilament); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all ABS brands, see the ABS profile.
DIALED-IN MATTERHACKERS SETTINGS
Generate a complete slicer profile tuned for Matterhackers on your specific printer and slicer in seconds.
Generate Settings for Matterhackers