ABS brand profile
FILAMENT PM
Recommended 255°C nozzle / 110°C bed. Max volumetric flow ~5.5 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
Community: GoodABS
Brand-Specific Recommended Settings
Recommended Nozzle
255°C
Generic ABS: 235-245°C
Recommended Bed
110°C
Generic ABS: 95-110°C
Max Print Speed
60 mm/s
Inherited from ABS profile
How Filament PM Differs from Generic ABS
Nozzle: 255°C- 10°C above the generic ceiling (generic ABS: 235-245°C).
Bed: 110°C- at the generic maximum (generic ABS: 95-110°C).
Community Verdict
Good
Recommended 255°C nozzle / 110°C bed. Max volumetric flow ~5.5 mm³/s. Single-source profile (prusaslicer); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all ABS brands, see the ABS profile.
DIALED-IN FILAMENT PM SETTINGS
Generate a complete slicer profile tuned for Filament PM on your specific printer and slicer in seconds.
Generate Settings for Filament PM