ABS brand profile
BEST FILAMENT
Recommended 232°C nozzle / 90°C bed. Single-source profile (cura); verify before relying on it.
Community: GoodABS
Brand-Specific Recommended Settings
Recommended Nozzle
232°C
Generic ABS: 235-245°C
Recommended Bed
90°C
Generic ABS: 95-110°C
Max Print Speed
60 mm/s
Inherited from ABS profile
How Best Filament Differs from Generic ABS
Nozzle: 232°C- 3°C below the generic floor (generic ABS: 235-245°C).
Bed: 90°C- 5°C below the generic floor (generic ABS: 95-110°C).
Community Verdict
Good
Recommended 232°C nozzle / 90°C bed. Single-source profile (cura); verify before relying on it.
For drying, storage, known issues, and post-processing tips that apply to all ABS brands, see the ABS profile.
DIALED-IN BEST FILAMENT SETTINGS
Generate a complete slicer profile tuned for Best Filament on your specific printer and slicer in seconds.
Generate Settings for Best Filament